Gigafast EE2400-SS 24-port Rack Mount 10/100 Fast Ethernet Switch w/ Auto-MDIX, VLAN, QoS

The EE2400-SS switch is a multi-speed, versatile network device that provides all 24 ports with VLAN function. This is a security feature that allow up to 24 work groups to operate separately without file-sharing, placing a virtual firewall between them to protect from unwanted access. Packets are physically unable to be sent between different work groups through the switch. This feature can be disabled or enabled.

Also, each 10/100Mbps TP port of the EE2400-SS switch, provides an Auto-Negotiation function that senses for the attached device’s maximum operating speed and automatically sets the switch to operate at that speed. Users only need to connect a network device into any TP port. Auto-MDIX is also supported on all the TP ports, which allow uplinking to other switches free of cross-over or straight cable selection hassles.

Features:

• Supports QoS function based on IEEE802.1p/IEEE802.1q port priority, VLAN tag priority and TCP/IP header’s TOS/DS
• Supports up to 24 group VLANs
• Provides console port and software for easy configuration
• Store-and-Forward technology filtering/forwarding is used to eliminate bad packets
• IEEE802.3x Flow-Control support
• All ports support Auto-Uplink, and Auto- Negotiation

Specifications:

• Standards
  • IEEE802.3, IEEE802.3u and IEEE802.3x Flow-Control for Full- Duplex operation
• Ports
  • Twenty-four (24) 100Base-TX (Copper)
• Cables
  • 10Base-T: Cat. 3, 4, or 5 UTP Cable
  • 100Base-TX: Cat. 5 UTP Cable
• Bandwidth
  • 100Base-TX : 200/100Mbps
  • 10Base-T : 20/10Mbps
• Forwarding/Filtering Rate
  • 148,810 packets/second per port @ 100Mbps, max
  • 14,881 packets/second per port @ 10Mbps, max
• Latency
• 8μs @ 100Mbps, Minimum
• 75μs @ 10Mbps, Minimum
• MAC Address
  • 8K six-byte entries maximum, Self-Learning
• Buffer Memory
  • 2.5MB
• Duplex Modes
  • TP ports have 10/100Mbps Full/Half-Duplex Auto-Negotiation
• Crossover
  • All the TP ports support Auto-MDIX function
• LED Indicators
  • Power, Link/ACT, Full-Duplex/Collision
• Power Supply
  • Full range Auto-Switching
  • Input voltage: 100~240 +/- 10% VAC 50~60Hz
• Power Consumption
  • 16.5 Watt Maximum
• Environment
  • Operating Temperature :0°C~45°C (32°F~113°F)
  • Storage Temperature : -20° C~70°C (-4°F~158°F)
• Certifications
  • FCC Class A / CE Mark
• Dimensions
  • 442 x 184 x 44mm (17.4 x 7.24 x 1.73 inches)